CE/EN certified systems · Certificate of Compliance on every order +44 7447 499183inquire@groxxgears.comContact us Search products Customer login
Request a quote
Groxx SS316 Closed-Body Turnbuckle, Jaw and Swage Stud (GGRXFS316-TB)

Fasteners

Groxx SS316 Closed-Body Turnbuckle, Jaw and Swage Stud

The Groxx SS316 Closed-Body Turnbuckle, Jaw and Swage Stud (GGRXFS316-TB) is a closed-body rigging screw with a jaw end and a swage stud end, used to tension a wire rope lifeline and fine-tune its sag during installation.

SKUGGRXFS316-TB
CategoryFasteners
Tagsturnbuckle, rigging screw, tensioner, lifeline, stainless, SS316

Pricing: trade prices are shown to registered customers. Log in to the customer portal, or ask us for a quote with certification documents.

Specifications

The Groxx SS316 Closed-Body Turnbuckle, Jaw and Swage Stud (GGRXFS316-TB) is a closed-body rigging screw with a jaw end and a swage stud end, used to tension a wire rope lifeline and fine-tune its sag during installation.

Key Features

  • Closed body with an inspection line, showing thread engagement at a glance.
  • Jaw end with pin connects directly to an end anchor or bracket.
  • Swage stud end is swaged directly onto 8 mm wire rope.
  • Left- and right-hand threads, so the body tensions the line without twisting the rope.

Technical Specifications

FeatureSpecification
ModelGGRXFS316-TB
MaterialAISI 316 / A4 austenitic stainless steel
TypeClosed body; jaw x swage stud
Rope size8 mm 7x19 wire rope (other sizes to order)
ThreadMetric, left- and right-hand
FinishPolished
LockingLock nuts on both ends
MarkingGroxx code and batch number on packaging; material certificate per batch

Load ratings: the working load limit depends on size. It is stated on the batch test certificate. Use only sizes approved in the lifeline design, and confirm loads with Groxx Gear Force or our engineering team.

Applications

Tensioning horizontal lifelines, static lines and safety cables; balustrade cable systems.

Used with Groxx SS316 wire rope, swaged cable extremities and Groxx horizontal lifelines.

Inspection and Care

  • Inspect before every use and at each periodic system inspection for corrosion, thread damage, deformation and cracks. Replace any damaged part; do not repair.
  • Do not mix stainless and galvanised or carbon-steel parts in one connection, to avoid galvanic corrosion.
  • Each batch is supplied with a material certificate (EN 10204 3.1) on request. Record batch numbers in Groxx ASMA.

Request a quote

Tell us about your site.

Share your structure and scope. Our team will come back with a compatible, certified system.