CE/EN certified systems · Certificate of Compliance on every order +44 7447 499183inquire@groxxgears.comContact us Search products Customer login
Request a quote

Monorail Systems for Building Maintenance

Monorail Systems for Building Maintenance

A building maintenance monorail is a fixed overhead track that carries a travelling trolley and a suspended cradle or gondola along a façade. The track is mounted under a soffit, roof edge or canopy, or along a parapet wall. It gives cleaning, inspection and glazing crews safe, repeatable access to every drop without a roof car or mobile crane. Groxx Gears supplies BMU monorail systems in Singapore, from the aluminium track profiles to the cradles that travel on them.

Groxx building maintenance monorail installed under a concrete roof overhang: aluminium track on galvanised steel hanger brackets, with the trolley and end stop, beside the glass façade
01

Where BMU Monorails Are Used

A monorail is the right access method where a roof-mounted BMU or davit system cannot reach the façade, or where a fixed, repeatable route is preferred.

  • Façades below overhangs and soffits: the track follows the underside of the projecting structure.
  • Canopies, podiums and atrium edges: access to glazing that a roof car cannot reach.
  • Curved and stepped façades: the track can follow the building line.
  • Low- and medium-rise buildings: where a full roof car is not practical.

Typical tasks include window cleaning, façade inspection, sealant and glazing maintenance and, with suitably rated equipment, glass replacement.

02

Types of BMU Monorail

The track is chosen to suit the structure it is fixed to and the route the cradle has to follow.

03

Ceiling-Mounted Monorail

The aluminium track profile GRXC70 is fixed beneath a soffit, canopy or roof overhang, and the trolley runs inside the profile. It suits façades where the structure above projects beyond the glass line.

Groxx ceiling-mounted aluminium monorail profile GRXC70
04

Wall-Mounted Monorail

The monorail GRXL71 is fixed on brackets to a parapet or upper wall. It is used where there is no overhead structure to hang a track from.

Groxx wall-mounted monorail GRXL71
05

Cradles and Gondolas

The monorail trolley suspends a cradle or gondola on wire ropes. Groxx supplies single-person cradles and standard gondola baskets for monorail access, matched to the number of workers, the tools they carry and the façade they work on.

Groxx single-person cradleGroxx standard gondola basket
06

Planning a BMU Monorail

  • Route and façade geometry: straight runs, curves, corners and parking positions.
  • Supporting structure: fixings and loads must be checked by a qualified engineer.
  • Cradle and capacity: number of workers, equipment and safe working load.
  • Travel: manual push trolley or motorised travel, depending on the route length.
  • Access and end stops: safe boarding of the cradle and positive end stops on the track.
  • Fall protection: an independent anchor or lifeline for each worker in the cradle.
  • Standards and inspection: suspended access equipment is typically designed and tested to EN 1808, with periodic thorough examination as local regulations require.
07

How to Choose a Monorail System Supplier in Singapore

Choose a supplier that can provide the track, trolley, cradle and fall protection as one system. They should also support load calculations, installation, testing and certification. Ask how inspections will be recorded after handover. Groxx ASMA keeps each monorail, cradle and anchor on one inspection register.

08

Why Choose Groxx Gears for BMU Monorails?

  • One supplier for the whole access system: track profiles, cradles, gondola baskets, davit systems and fall arrest equipment.
  • Components that work together: track, trolley and cradle are selected as a system, not as separate parts.
  • Technical data sheets: every product page has a downloadable Groxx data sheet.
  • Inspection records: assets can be tracked in Groxx ASMA from handover.

FAQ

Frequently Asked Questions

What is a BMU monorail?

A fixed overhead track, mounted under a soffit or canopy or on a parapet wall, that carries a trolley and a suspended cradle or gondola along a façade for cleaning, inspection and maintenance.

When is a monorail used instead of a roof car or davit system?

When overhangs, canopies, curved façades or limited roof space prevent a roof-mounted BMU or davits from reaching the façade, or when a fixed, repeatable route is preferred.

Can a monorail be used for glass replacement?

Yes, if the track, trolley, cradle and lifting equipment are rated for the glass weight. This must be confirmed at the design stage.

Where can I find a BMU monorail system supplier in Singapore?

Contact Groxx Gears with your building drawings and façade access requirements.

Components

Components and data sheets

Every component in this system with its product page and downloadable data sheet.

Open in the catalog

Request a quote

Tell us about your site.

Share your structure and scope. Our team will come back with a compatible, certified system.