
Work Positioning & Rope Access Harnesses
Groxx Work Positioning Harness, 3-Point, Quick-Buckle Chest Strap
The Groxx Work Positioning Harness, 3-Point, Quick-Buckle Chest Strap (GGRXWPH301) is a full body harness made to EN 361 / EN 358. It is built from 45 mm high-tenacity polyester webbing with steel D-rings, stamped steel buckles, in one universal size that adjusts to fit most workers. Pole and tower …
Pricing: trade prices are shown to registered customers. Log in to the customer portal, or ask us for a quote with certification documents.
Specifications
The Groxx Work Positioning Harness, 3-Point, Quick-Buckle Chest Strap (GGRXWPH301) is a full body harness made to EN 361 / EN 358. It is built from 45 mm high-tenacity polyester webbing with steel D-rings, stamped steel buckles, in one universal size that adjusts to fit most workers. Pole and tower work, rebar and formwork, and any task where the worker leans into a positioning lanyard.
Key Features
- Attachment: Dorsal (back) D-ring for fall arrest; Two lateral (side) D-rings on the waist belt for work positioning.
- Padded waist belt with two lateral D-rings for an EN 358 positioning lanyard.
- Soft waist pad spreads the load while the worker leans back in position.
- 25 mm chest strap with plastic quick-release buckle.
- 4 adjustment points: Chest strap (25 mm, plastic quick buckle), waist belt, left thigh strap, right thigh strap.
Technical Specifications
| Feature | Specification |
|---|---|
| Model | GGRXWPH301 |
| Product type | Work Positioning & Rope Access Harnesses |
| Standards | EN 361 + EN 358 · also EN 358 |
| EN requirement | Static 15 kN at fall-arrest and work-positioning attachment points |
| Attachment points | 2: Dorsal (back) D-ring for fall arrest; Two lateral (side) D-rings on the waist belt for work positioning |
| Adjustment points | 4 |
| Webbing | 45 mm high-tenacity polyester |
| Hardware | Steel D-rings, stamped steel buckles |
| Size | Universal (one size, adjustable) |
| Maximum user weight | 100 kg including tools and equipment |
| Marking | Groxx model code, serial/batch number, standard, date of manufacture |
| Inspection | Before every use; detailed inspection by a competent person every 12 months |
Standards and Compliance
- EN 361 full body harness for fall arrest
- EN 358 belt and lateral D-rings for work positioning and restraint
Only use the lateral D-rings for work positioning or restraint, never for fall arrest. Positioning must always be backed up by a fall arrest system attached to the dorsal or front point.
Applications
Pole and tower work, rebar and formwork, and any task where the worker leans into a positioning lanyard.
Inspection and Care
- Inspect the harness before every use: webbing for cuts, burns, fraying or chemical damage; stitching for broken or pulled threads; D-rings and buckles for cracks, distortion or corrosion.
- A competent person must carry out a detailed periodic inspection at least every 12 months, and record it. Groxx ASMA can schedule and record these inspections.
- Withdraw the harness from use immediately after it has arrested a fall.
- Clean with lukewarm water and mild soap, dry naturally away from direct heat and sunlight, and store in a dry, ventilated place.
- Have a rescue plan in place before work starts. Suspension after a fall must be kept as short as possible.
Request a quote
Tell us about your site.
Share your structure and scope. Our team will come back with a compatible, certified system.