
Double Hook Energy Absorbing Lanyards EN 355
Groxx Twin Webbing Energy Absorbing Lanyard, Steel Carabiner + 2 × Forged Steel Scaffold Hook (Yellow)
The Groxx twin-leg energy absorbing lanyard (GGRXEAL202) is made to EN 355 from 28 mm polyester webbing with a 45 mm tear-web energy absorber pack. In a fall the absorber tears open and limits the force on the worker and the anchor to 6 kN or less. It is fitted with a steel screw-gate carabiner at t…
Pricing: trade prices are shown to registered customers. Log in to the customer portal, or ask us for a quote with certification documents.
Specifications
The Groxx twin-leg energy absorbing lanyard (GGRXEAL202) is made to EN 355 from 28 mm polyester webbing with a 45 mm tear-web energy absorber pack. In a fall the absorber tears open and limits the force on the worker and the anchor to 6 kN or less. It is fitted with a steel screw-gate carabiner at the harness end and two forged steel scaffold hooks at the anchor end.
Key Features
- Energy absorber in a protective cover with inspection label, limiting the arrest force to 6 kN or less (EN 355).
- 28 mm polyester webbing.
- Length 2.0 m maximum including connectors and absorber.
- Twin legs for 100% tie-off: one leg is always connected while the other moves past an obstruction.
- Maximum user weight 100 kg including tools.
Technical Specifications
| Feature | Specification |
|---|---|
| Model | GGRXEAL202 |
| Product type | Twin-leg energy absorbing lanyard |
| Standard | EN 355 energy absorber with EN 354 lanyard and EN 362 connectors |
| EN requirement | Max. braking force 6 kN; max. extension 1.75 m; static 15 kN (absorber), 22 kN (textile lanyard); 100 kg test mass |
| Lanyard material | 28 mm polyester webbing |
| Energy absorber | 45 mm tear-web pack in protective cover |
| Arrest force | 6 kN or less |
| Length | 2.0 m maximum |
| Maximum user weight | 100 kg |
| Harness-end connector | Steel screw-gate carabiner GGRXCSG110 (EN 362) |
| Anchor-end connector | 2 × Forged steel scaffold hook GGRXSCH120, large gate (EN 362) |
| Colour | yellow |
| Required clearance | About 6 m below the anchor with a 2 m lanyard (lanyard length + absorber deployment up to 1.75 m + worker height + 1 m safety margin) |
| Marking | Groxx model code, serial/batch number, standard, date of manufacture |
Important: check the clearance below the work position before use. Do not connect the unused leg back to the harness except at a designated parking point, as this can bypass the energy absorber. Anchor at or above the dorsal D-ring wherever possible.
Applications
Scaffolding, steel erection and structures where the worker must move past anchor points while staying connected at all times.
Inspection and Care
- Inspect before every use: rope or webbing, splices and stitching, energy absorber pack (where fitted) and every connector gate and locking mechanism.
- A competent person must carry out a detailed periodic inspection at least every 12 months, and record it.
- Withdraw from use immediately after a fall, or if the energy absorber shows any sign of deployment.
- Keep away from sharp edges, hot surfaces, chemicals and abrasive surfaces. Do not knot or shorten the lanyard by tying it.
- Clean with lukewarm water and mild soap, dry naturally and store away from heat and UV light.
Request a quote
Tell us about your site.
Share your structure and scope. Our team will come back with a compatible, certified system.