7 x 19 Stainless Wire Rope
The Groxx Swagless Tensioner (Model NO: GGST004) is a premium, high-strength industrial cable termination and adjustment device engineered for flexible horizontal and vertical wire rope lifeline systems. Functioning as a critical structural inline connector, this specialized component bridges the system’s flexible cable to its force-damping energy absorber or end-anchor brackets. It provides both fine-tuned line tension calibrations and tool-free field installations.
Tool-Free Field Termination: Features an advanced internal swagless compression mechanism that allows for instant, high-integrity terminations directly on-site without requiring hydraulic crimping machines or specialized swaging tools.
Integrated Line Tension Calibration: Serves as a continuous adjustment module, allowing installers to fine-tune pre-tensioning across the wire rope matrix to minimize dynamic cable sag over long spans.
Vibration-Proof Anti-Rotation Lock: Engineered with an anti-vibration cable sealing lock that prevents the tensioner assembly from backing out or unthreading when subjected to constant architectural wind currents or building vibration.
Universal 8mm Wire Optimization: Specifically tailored to terminate standard $\varnothing$ 8mm stainless steel wire ropes, making it highly versatile for structural building envelopes and industrial roof spaces.
| Feature | Specification |
| Product Model | GGST004 |
| Material Build | Marine-Grade Stainless Steel |
| Cable Diameter Compatibility | 8 mm Wire Rope Only |
| Minimum Breaking Strength (MBS) | 25 kN |
| Unit Weight | 0.988 |
| Fulfillment Mode | Swagless Compression Sleeve Terminal |
The Swagless Tensioner is structurally calculated and tested to satisfy international safety regulations for personal protective equipment (PPE) and flexible horizontal anchor devices:
EN 795:2012 Type C: Certified under European standards as an integrated structural component for flexible anchor lifelines.
CEN/TS 16415:2013: Fully validated for multi-user safety architectures, ensuring system integrity is held even under concurrent fall arrest dynamic loads across continuous lines.
Extreme Tensile Rating: Boasting a robust 25 kN minimum breaking strength, the hardware vastly exceeds typical single-user safety thresholds, introducing a substantial engineering safety factor into the lifeline layout.
Reduced Labor Footprint: By replacing slow, error-prone manual swaging with a high-torque mechanical grip thread, field installation times are slashed, enabling fast on-site terminations irrespective of high-altitude geometry constraints.
Marine-Grade Durability: Forged from high-grade stainless steel to resist localized pitting and galvanic corrosion, keeping internal adjustment threads fluid and operational over long service intervals.
